Shanling
SHANLING SCD3.3 High-End SACD Player Silver NEW
Κωδικός:
3.599,00 €
με ΦΠΑ
Key Features of SCD3.3
- Proprietary Disc System with HD850 Laser
- Top-Loading Drive with dedicated CD Puck
- True DSD data from SACD for internal DAC & Digital Outputs*
- 2nd generation of R2R DAC module, utilizing 212x 0.01% ultra-precision resistors
- Classic 12AT7 Tube Output
- RCA & XLR Outputs, Line-out & Pre-amplifier Mode
- FPGA-assisted I2S output with 10 pinout modes, offering Native DSD transport
- Dual 66W Transformer Power Supply
- Robust Aluminium chassis, total weight at 10kg
- In-House Developed Music Focused System
- USB Drive Playback & Bluetooth Receiver Function
- 5-Inch Touch screen, Remote Controller, Companion App
*(I2S, Coaxial)
RETAIL: 3.999 EUR >>> 3.599 EUR !!
SHIPPING only WITHIN EU
ΔΥΝΑΤΟΤΗΤΑ ΔΙΑΚΑΝΟΝΙΣΜΟΥ ΚΑΤΟΠΙΝ ΕΠΙΚΟΙΝΩΝΙΑΣ
Έως 12 άτοκες δόσεις για αγορά On-Line με πιστωτική
Μέθοδοι Αποστολής
Shanling SCD3.3
Combining our unique SACD reading capabilities with the 2nd generation of R2R DAC and adding in a classic tube audio output, representing the Ultimate Level of Audio Source for the most demanding Hi-Fi setups!
A Disc Player That Does Justice to SACD
At its foundation is Shanling’s proprietary HD850 top-loading disc mechanism, purpose-built for both SACD (including hybrid discs) and standard CD playback. What makes this special is the FPGA-assisted I2S output with 10 selectable pinout modes, which means your SACDs can be output as true native DSD64 to virtually any external DAC with an I2S input. You also get DoP DSD64 over coaxial SPDIF, plus full 4x unfolding of MQA-CDs. Layer switching between CD and SACD is smooth and automatic.
Second-Generation R2R Conversion
Rather than using an off-the-shelf DAC chip, Shanling developed their own second-generation R2R DAC system built around 212 ultra-precision resistors (0.0001% tolerance). The 24-bit module uses a 19-bit resistor ladder with 4-bit compensation in a push-pull differential circuit architecture. The result is a sound that is naturally rich, smooth, and detailed in a way that chip-based DACs rarely achieve — music just flows.
Tubes Done Right
The analog output stage is driven by a matched pair of 12AT7 tubes, designed by Dr. Cai Hongren. Both the RCA and XLR outputs benefit from the tube amplification stage, adding that classic warmth and dimensional quality that Shanling has been known for. These are not decoration — they are integral to the sound signature.
Thoughtful Circuit Design
OPA1612 low-pass filter
MUSES8920E output stage
ELNA, Nichicon & Panasonic capacitors
Dual-oscillator clocking:
90/98 MHz for FPGA
45/49 MHz for XMOS
Dual R30 transformers (66W total) + 15W auxiliary module
Well-Connected
USB Drive Playback up to PCM 768 kHz/32-bit & DSD512
Digital Inputs: USB DAC, coaxial SPDIF, Bluetooth 5.0
Digital Outputs: I2S, USB Audio, Coaxial SPDIF
Analog Outputs: RCA & XLR
Line-out and preamp modes available
Built to Last, Built to Impress
CNC-machined aluminum chassis (9.5 mm thick)
Top-loading mechanism with precision puck
5-inch LG touchscreen (854×358)
Dedicated tube window
Remote control + Eddict Player app integration
Technical Specifications
Dimensions: 430 x 319 x 91 mm
Weight: ~10 kg
Processor: Ingenic X2000
Power: Dual R30 transformers + 15 W module
Voltage: Region-locked 100 V or 220 V
Supported Playback Modes
SACD/CD
USB DAC
Coaxial digital input
USB Drive
Bluetooth receiver
USB DAC / USB Output
XMOS XU316 processor
PCM up to 768 kHz/32-bit
DSD up to DSD512
Digital Output Limits
I2S: PCM 768 kHz, DSD512
Coaxial SPDIF: PCM 192 kHz, DoP DSD64
USB Drive Format Support
PCM: 768 kHz/32-bit
DSD: DSD512
Analog Output Performance
RCA (Line Out)
Output Level: 2.45 Vrms
Frequency Response: 20 Hz-40 kHz
THD+N: 0.15%
XLR (Line Out)
Output Level: 4.9 Vrms
Frequency Response: 20 Hz-40 kHz
THD+N: 0.15%
Λεπτομέρειες προϊόντος
