

Silver 200 7G Ash
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
Payment Options
Shipping Options
Key Features
1 x 1" (25 mm) C-CAM Gold Dome tweeter with Uniform Dispersion (UD) Waveguide II for more lifelike sound
2 x 5¼" (134 mm) C-CAM mid-bass driver with Rigid Surface Technology (RST) II for extra clarity
2.5-way design where the top driver is a mid-bass and the bottom is bass only
Following the proportions of our most successful speakers, the Silver 200 7G has a small footprint that fits very easily into any modern home
The best of both worlds – size and performance
Perfect for small to mid-sized room set-ups, either with a stereo or a home cinema system
Rear-ported and tuned for ease of positioning without affecting sound performance
Increased stability with sturdy outrigger feet and a choice of spikes for carpets or rubber feet for hard floors
Choice of high quality finishes: Satin White, High Gloss Black, including real wood veneers Black Oak, Natural Walnut, Ash
Specifications
System Format
2 1/2 - way
Frequency Response, In-Room (-6dB)
34 Hz - 35 kHz
Sensitivity (2.83v @ 1m)
87.5 dB
Nominal Impedance
8 Ohms
Minimum Impedance
5.0 Ohms @ 240 Hz
Maximum SPL (single, free-field)
108 dB
Power Handling (RMS)
150 W
Recommended Amplifier Requirements
60 - 150 W
Crossover Frequency
2.7 kHz
Port Tuning Frequency
49 Hz
Bass Alignment
Bass reflex
Dual HiVe II port system
Drive Unit Complement
2 x 5 1/4" C-CAM RST II mid-bass driver
1 x 1" (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II
External Dimensions (Including Grille and Terminals (H x W x D))
885 x 165 x 272 mm (3313/16 x 61/2 x 103/8")
External Dimensions (including Outrigger Feet and Spikes (H x W x D))
930 x 254 x 329 mm (3639/64 x 10 x 1261/64")
Weight (each)
13.7 kg (30 lb 3 oz)
Sold As
Pair
In the same category
Silver 300 7G Ash
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
Bronze 200 6G White
Bronze 200 6G
Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound.
They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them, their elegant styling will ensure they will receive admiring glances.
Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size.
SCM40 Satin White
SCM40
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
ATC 164mm bass driver.
Massive optimised motor assembly.
ATC Soft Dome mid-range driver.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.” Hi-Fi Choice, October 2014
Silver 300 7G High Gloss Black
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
OB-4 glossy red
OB–4
OB–4 is our portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.
Bluetooth, FM–signal, line-in and disk mode
72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
uv resistant paint
compatible with ortho remote and orthoplay app
dimensions: 232.5 x 284 x 57.5 mm | 9.2 x 11.2 x 2.3 in
Silver 200 7G High Gloss Black
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
SCM20ASL
SCM20ASL | ACTIVE
The active SCM20ASL features an on-board 250W Amp Pack. Simply pair with a suitable pre-amplifier, DAC/pre or streaming-pre-amp for stunning results.
The active SCM20ASL replaces the passive crossover and the driving amplifier of a 'conventional' system with a precisely matched 'Amp Pack', mounted to the rear of the loudspeaker cabinet. The electronic system consists of a balanced input feeding a 2nd order active electronic crossover which, in turn, feeds a pair of class A/B power amplifiers, carefully tailored to the exact requirements of the mid/bass and high-frequency drive units.
Silver 500 7G Satin White
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
EOS 5
There has never been a loudspeaker like EOS 5
Thanks to new and unprecedented engineering solutions, EOS 5 achieves seemingly contradictory goals: compact and placement-friendly yet possessed of full-frequency-range performance, highly efficient yet capable of massive power handling and prodigious volume output, liquid and fatigue-free yet ruthlessly revealing of associated equipment, EOS 5 is the ultimate speaker when space is the only limitation.
SCM19A Cherry
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Silver 100 7G Natural Walnut
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
Silver 100 7G High Gloss Black
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
OD-11 white
OD-11
experience the warm and natural carlsson sound.
wireless loudspeaker made to play all your music, from any device. the unmistakably warm and relaxed carlsson sound has returned. pair two or more together for wireless stereo.
compatible with all music services
connect any instrument, turntable, gaming console or tv, for a rich sound experience
pair your OD-11 with orthoplay, the free software remote control app
ortho remote also available separately for wireless control
Gold 50 6G Macassar Wood Veneer
Gold 50 6G
The Gold 50 6G is a compact, high-fidelity bookshelf speaker. Its discreet proportions, plus the ability to partner it with the ST-2 speaker stand, make it the most flexible of all the Gold Series 6G models when it comes to placement in a listening environment. Designed to house the latest MPD III high- frequency transducer and a powerful 6-inch mid-bass driver, both of which benefit from the new HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 50 6G is a joy, delivering purity, precision, and a never less than compelling listen.
The Gold 50 6G is the smallest model in the Gold Series 6G. Incredibly flexible in its positioning potential, this two-way model features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 6-inch mid-bass driver.

Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.