

SCM19A Satin Black
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Payment Options
Shipping Options
Drivers: HF ATC 25mm dual suspension Tweeter, Mid/LF ATC 150mm SL
Matched Response: +/- 0.5dB
Frequency Response (-6dB): 54Hz-22kHz
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Max SPL: 108dB
Crossover Frequency: 2.5kHz
Input Connector: Female XLR
Input sensitivity: 1V
Filters: 2nd Order critically damped with phase compensation
Overload Protection: Active FET momentary gain reduction
Amplifier Output: 150W LF, 32W HF
Dimensions (HxWxD): 980 x 370 x 344mm / 38.58 x 14.56 x 13.54″ (inc. foot plinth & amp, spikes add 25mm to height, grill adds 34mm to depth)
Weight: 31kg
Spikes: 4 per cabinet, M8 x 1.25mm
In the same category
ES-14N walnut
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
Gold 50 6G Macassar Wood Veneer
Gold 50 6G
The Gold 50 6G is a compact, high-fidelity bookshelf speaker. Its discreet proportions, plus the ability to partner it with the ST-2 speaker stand, make it the most flexible of all the Gold Series 6G models when it comes to placement in a listening environment. Designed to house the latest MPD III high- frequency transducer and a powerful 6-inch mid-bass driver, both of which benefit from the new HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 50 6G is a joy, delivering purity, precision, and a never less than compelling listen.
The Gold 50 6G is the smallest model in the Gold Series 6G. Incredibly flexible in its positioning potential, this two-way model features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 6-inch mid-bass driver.
Silver 50 7G Black Oak
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
SCM40A Satin Black
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Bronze 200 6G White
Bronze 200 6G
Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound.
They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them, their elegant styling will ensure they will receive admiring glances.
Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size.
SCM7 v3 Cherry
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
ES-7N white
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
Silver 200 7G Satin White
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
SCM19A Cherry
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Bronze 200 6G Black
Bronze 200 6G
Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound.
They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them, their elegant styling will ensure they will receive admiring glances.
Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size.
Silver 100 7G Satin White
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
ES-28N
„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?
(*answered in Description)
Silver 200 7G High Gloss Black
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
OB-4 black
OB–4
OB–4 is our portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.
Bluetooth, FM–signal, line-in and disk mode
72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
uv resistant paint
compatible with ortho remote and orthoplay app
dimensions: 232.5 x 284 x 57.5 mm | 9.2 x 11.2 x 2.3 in

SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.