SCM40 Satin Black

Silver 200 7G

In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.

Silver 50 7G

Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

Silver 50 7G

Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

Vienna Acoustics Mozart SE Signature

Das Wunderkind

"The evolution of technology and capability"

It is virtually impossible to fully express the impact Wolfgang Amadeus Mozart - universally known for his elegantly moving melodic lines, grounded on subtly sophisticated musical structures - has had on the identity of our home, Vienna.

The refinement of our Mozart's aesthetics over the years is obvious and achieved due to our decades-long partnership with highest grade European furniture manufacturers. 

SCM19A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral Soft Dome.

9kg optimised short-coil/long gap motor assembly.

On-board grounded source 182 watt Class A/B Bi-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

Bronze 500 6G

The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet, housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter, featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance.

On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction.

With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room.

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.”  Hi-Fi Choice Magazine, September 2014

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm 

Minimum Impedance: 4.3 Ohm @ 160Hz 

Sensitivity: 87dB @oe2.823V / 1m 

Distortion: 0.2% THD @ 1W 

Crossover Frequency: 2700 Hz 

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround. 

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid 

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm 

Weight: 16 kg without stand 

Finish: Walnut, White semi matte, Black semi matte 

Gold 50 6G

The Gold 50 6G is a compact, high-fidelity bookshelf speaker. Its discreet proportions, plus the ability to partner it with the ST-2 speaker stand, make it the most flexible of all the Gold Series 6G models when it comes to placement in a listening environment. Designed to house the latest MPD III high- frequency transducer and a powerful 6-inch mid-bass driver, both of which benefit from the new HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 50 6G is a joy, delivering purity, precision, and a never less than compelling listen.

The Gold 50 6G is the smallest model in the Gold Series 6G. Incredibly flexible in its positioning potential, this two-way model features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 6-inch mid-bass driver.

Silver 500 7G

There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.

Silver 200 7G

In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.

Gold 50 6G

The Gold 50 6G is a compact, high-fidelity bookshelf speaker. Its discreet proportions, plus the ability to partner it with the ST-2 speaker stand, make it the most flexible of all the Gold Series 6G models when it comes to placement in a listening environment. Designed to house the latest MPD III high- frequency transducer and a powerful 6-inch mid-bass driver, both of which benefit from the new HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 50 6G is a joy, delivering purity, precision, and a never less than compelling listen.

The Gold 50 6G is the smallest model in the Gold Series 6G. Incredibly flexible in its positioning potential, this two-way model features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 6-inch mid-bass driver.