Home (2)

Category: Home

Compare (0)

Sphono + Sphono Power Phono Preamplifier

Silver Electra 7 Power Cable - 1.5m - 20A Version (C19 Connector)

€730.00 €520.00

On sale!
-€210.00

Silver Electra 7 Power Cable - 1m - 20A Version (C19 Connector)

€600.00 €440.00

On sale!
-€160.00

Silver Electra 7 Power Cable - 3m

€850.00

SPHERE HDMI 12m* (NEW, SEALED)

€199.00

Wireworld USA Nova Optical Digital Cable TOSLINK to 3,5mm Optical Jack 1m* (*NEW, SEALED)

€35.00

Wireworld USA Chroma 7 4K HDMI 18Gbps 1m* (*NEW, SEALED)

€45.00

P6

€599.99

P6 6A Ultra Low Noise Linear Power Supply

High Quality Toroidal Transformer provide pure power
Separate ground for each output rail
Ultra low ripple noise
No humming or buzz noise for 50Hz and peak load
Newly designed the Circuit that do not use any ICs. It is truly Analog design
Dual output provide 3A for each
Over Temperature Protection (OTP)

„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?

(*answered in Description)

EXO 3pcs

€390.00

Aktyna EXO

Specially designed for heavy loads (up to 54 kg), the EXO is perfect for power amplifiers, subwoofers, or column speakers.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 54 kg per foot.

Dimensions: 60 x 42 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 54 kg per foot.

EXO 4pcs

€530.00

Aktyna EXO

Specially designed for heavy loads (up to 54 kg), the EXO is perfect for power amplifiers, subwoofers, or column speakers.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 54 kg per foot.

Dimensions: 60 x 42 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 54 kg per foot.

ENO 3pcs

€280.00

Aktyna ENO

Perfect for digital sources, preamplifiers, or small amplifiers, the ENO model offers optimal isolation for light loads (up to 9 kg).

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 9 kg per foot.

Dimensions: 40 x 33 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 9 kg per foot.

ENO 4pcs

€350.00

Aktyna ENO

Perfect for digital sources, preamplifiers, or small amplifiers, the ENO model offers optimal isolation for light loads (up to 9 kg).

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 9 kg per foot.

Dimensions: 40 x 33 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 9 kg per foot.

EGO 3pcs

€300.00

Aktyna EGO

Versatile and suitable for a wide range of devices (up to 27 kg), the EGO is ideal for integrated amplifiers, CD players, or turntables.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 27 kg per foot.

Dimensions: 50 x 36 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 27 kg per foot.

EGO 4pcs

€400.00

Aktyna EGO

Versatile and suitable for a wide range of devices (up to 27 kg), the EGO is ideal for integrated amplifiers, CD players, or turntables.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 27 kg per foot.

Dimensions: 50 x 36 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 27 kg per foot.

PowerQuest 303

€599.00

PowerQuest® 303

12-Outlet Power Conditioner & Non-Sacrificial Surge Protector

AudioQuest PowerQuest 303 is a high-performance power conditioner with 12 AC outlets (4 High-Current outlets for amplifiers and 8 Linear-Filtered outlets for source components), a 2m detachable AC power cable, and 2RU rack ears for simple rack-mounting.

PowerQuest 505

€799.00

PowerQuest® 505

12-Outlet Power Conditioner & Non-Sacrificial Surge Protector

AudioQuest PowerQuest 505 is a high-performance power conditioner with 12 AC outlets (4 High-Current outlets for amplifiers and 8 Ultra-Linear-Filtered outlets for source components), a 2m detachable AC power cable featuring ZERO-Tech and RF/ND-Tech, and 2RU rack ears for simple rack-mounting.

PowerQuest 707

€1,299.00

PowerQuest® 707

12-Outlet Power Conditioner & Non-Sacrificial Surge Protector

AudioQuest PowerQuest 707 is a high-performance power conditioner with 12 AC outlets (4 High-Current spec-grade outlets for amplifiers and 8 Ultra-Linear-Filtered outlets for source components), Transient Power Correction circuitry, a 2m detachable AC power cable featuring ZERO-Tech and RF/ND-Tech, and 2RU rack ears for simple rack-mounting.

E40

€719.00

E40 Integrated Amplifier

Neat, small-footprint, fully discrete AB Sanken-based amplifier, with phono, headphone, stereo pre-out & usb dac connectivity

Features

50 watts per channel @ 8 Ohm

Favorite volume memory with remote control button

Superb sounding headphone jack

Phono input for MM with 47k ohm

2 pairs of RCA line level analog inputs

Pre-amp output for adding a subwoofer

USB 2.0 supports PCM up to 48kHz/16-bit

3mm thick aluminum chassis, to effectively block EMI/RFI interference

Full-metal constructon for both vibration control and elegant styling

Half-size chassis enables desktop placement and fits a small stereo system

Attessa CD Transport Silver

€745.00

Attessa CD Transport

The Attessa CD Transport is an in-house design that enables users to appreciate their prized CD collection in glorious high-fidelity.

Features at a glance:

CD / CD-R Red-book audio | SPDIF coaxial (16bit/44.1kHz) | MaestroUnite Setup & Control App | Perfect Synchronicity with Attessa Amplifiers

Attessa CD Transport Black

€745.00

Attessa CD Transport

The Attessa CD Transport is an in-house design that enables users to appreciate their prized CD collection in glorious high-fidelity.

Features at a glance:

CD / CD-R Red-book audio | SPDIF coaxial (16bit/44.1kHz) | MaestroUnite Setup & Control App | Perfect Synchronicity with Attessa Amplifiers

ES-14N black

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-14N walnut

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-14N white

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte