- Home
- Home
UDP900 MKII
IN STOCK !!
Roon Ready in certification
Fully Redesigned Audio utilizing dual ESS9038PRO DAC’s
TMDS retiming on HDMI audio port
Enhanced USB 3.0 system with isolated powe
XMOS supports PCM768/512 DSD
Upgraded copper wiring and Amphenol/JST connectors
Control 4 Support
Crestron Support
Wake-up on Lan
UDP800 MKII
IN STOCK !!
Roon Ready in certification
Newly redesigned 2.0 audio boards with seven OPA1602 op-amps
TMDS retiming on HDMI audio port
Enhanced USB 3.0 system with isolated power
Upgraded copper wiring and Amphenol/JST connectors
Control 4 Support
Crestron Support
COS Engineering D10 Phono Module* (*NEW, SEALED)
COS Engineering D10 Phono Stage Module
- Gain : 40, 50 or 60dB
- Input impedance: 40 kohms - 10 ohms
- Input capacitance: 0 à 750pF
- RIAA response: <+-0,2dB 20Hz - 20kHz
- Residual noise: <30uV with 40dB gain & <300uV with 60dB gain
- Harmonic distortion: <-90dB with 40dB gain, 470 ohms load @ 1kHz, 2Vrms, <-70dB with 60dB gain, 470 ohms load @ 1kHz, 2Vrms
RETAIL: 1200 EUR >>> 749 EUR !!!
ΑΤΟΚΕΣ ΔΟΣΕΙΣ ΜΕ ΠΙΣΤΩΤΙΚΗ ΚΑΡΤΑ: ΕΑΝ ΕΠΙΘΥΜΕΙΤΕ ΑΤΟΚΟ ΔΙΑΚΑΝΟΝΙΣΜΟ, ΠΑΡΑΚΑΛΟΥΜΕ, ΕΠΙΚΟΙΝΩΝΗΣΤΕ ΜΑΖΙ ΜΑΣ.
Sonorus XL Direct S350 - 3.5m XLR to XLR set of 2 pcs
ΑΤΟΚΕΣ ΔΟΣΕΙΣ ΜΕ ΠΙΣΤΩΤΙΚΗ ΚΑΡΤΑ: ΕΑΝ ΕΠΙΘΥΜΕΙΤΕ ΑΤΟΚΟ ΔΙΑΚΑΝΟΝΙΣΜΟ, ΠΑΡΑΚΑΛΟΥΜΕ, ΕΠΙΚΟΙΝΩΝΗΣΤΕ ΜΑΖΙ ΜΑΣ.
Sonorus XL Direct S100 - 1m XLR to XLR set of 2 pcs
ΑΤΟΚΕΣ ΔΟΣΕΙΣ ΜΕ ΠΙΣΤΩΤΙΚΗ ΚΑΡΤΑ: ΕΑΝ ΕΠΙΘΥΜΕΙΤΕ ΑΤΟΚΟ ΔΙΑΚΑΝΟΝΙΣΜΟ, ΠΑΡΑΚΑΛΟΥΜΕ, ΕΠΙΚΟΙΝΩΝΗΣΤΕ ΜΑΖΙ ΜΑΣ.
VOVOX Cables
Vovox Instrument Cables
Διατίθεται ευρεία γκάμα καλωδίων για επαγγελματίες του ήχου και για μουσικούς. Παρακαλόυμε, καλέστε μας για διαθεσιμότητα.
ES-28N
„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?
(*answered in Description)
PowerQuest 303
PowerQuest® 303
12-Outlet Power Conditioner & Non-Sacrificial Surge Protector
AudioQuest PowerQuest 303 is a high-performance power conditioner with 12 AC outlets (4 High-Current outlets for amplifiers and 8 Linear-Filtered outlets for source components), a 2m detachable AC power cable, and 2RU rack ears for simple rack-mounting.
PowerQuest 505
PowerQuest® 505
12-Outlet Power Conditioner & Non-Sacrificial Surge Protector
AudioQuest PowerQuest 505 is a high-performance power conditioner with 12 AC outlets (4 High-Current outlets for amplifiers and 8 Ultra-Linear-Filtered outlets for source components), a 2m detachable AC power cable featuring ZERO-Tech and RF/ND-Tech, and 2RU rack ears for simple rack-mounting.
PowerQuest 707
PowerQuest® 707
12-Outlet Power Conditioner & Non-Sacrificial Surge Protector
AudioQuest PowerQuest 707 is a high-performance power conditioner with 12 AC outlets (4 High-Current spec-grade outlets for amplifiers and 8 Ultra-Linear-Filtered outlets for source components), Transient Power Correction circuitry, a 2m detachable AC power cable featuring ZERO-Tech and RF/ND-Tech, and 2RU rack ears for simple rack-mounting.
ES-14N black
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
ES-14N walnut
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
ES-14N white
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
ES-7N white
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
ES-7N black
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
ES-7N orange
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte















