Home (2)

Category: Home

Compare (0)

SolidSteel SS-7 Speaker Stand Black

€539.00

SS Series

Iconic Loudspeaker Stands – Solidsteel’s Flagship – designed in 1992
Main frame in steel entirely hand-welded with brass
Ennobled MDF wood with Lacquered Finish for Top Plates
Compatible with the majority of bookshelf speakers in the AV market
40 kg of maximum load per each stand
Fillable frame parts
Adjustable stainless steel spikes and protective floor discs included

ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

SolidSteel SS-6 Speaker Stand Black

€515.00

SS Series

Iconic Loudspeaker Stands – Solidsteel’s Flagship – designed in 1992
Main frame in steel entirely hand-welded with brass
Ennobled MDF wood with Lacquered Finish for Top Plates
Compatible with the majority of bookshelf speakers in the AV market
40 kg of maximum load per each stand
Fillable frame parts
Adjustable stainless steel spikes and protective floor discs included

ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

SolidSteel SS-5 Speaker Stand Black

€505.00

SS Series

Iconic Loudspeaker Stands – Solidsteel’s Flagship – designed in 1992
Main frame in steel entirely hand-welded with brass
Ennobled MDF wood with Lacquered Finish for Top Plates
Compatible with the majority of bookshelf speakers in the AV market
40 kg of maximum load per each stand
Fillable frame parts
Adjustable stainless steel spikes and protective floor discs included

ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

P6

€599.99

P6 6A Ultra Low Noise Linear Power Supply

High Quality Toroidal Transformer provide pure power
Separate ground for each output rail
Ultra low ripple noise
No humming or buzz noise for 50Hz and peak load
Newly designed the Circuit that do not use any ICs. It is truly Analog design
Dual output provide 3A for each
Over Temperature Protection (OTP)

SCM11 Cherry

€2,300.00

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM20 Walnut

€5,590.00

SCM20

Overview

The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.

Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency output or ‘boom’.

SCM20ASL

€9,000.00

SCM20ASL | ACTIVE

The active SCM20ASL features an on-board 250W Amp Pack. Simply pair with a suitable pre-amplifier, DAC/pre or streaming-pre-amp for stunning results.

The active SCM20ASL replaces the passive crossover and the driving amplifier of a 'conventional' system with a precisely matched 'Amp Pack', mounted to the rear of the loudspeaker cabinet. The electronic system consists of a balanced input feeding a 2nd order active electronic crossover which, in turn, feeds a pair of class A/B power amplifiers, carefully tailored to the exact requirements of the mid/bass and high-frequency drive units.

SCM20 Oak

€5,590.00

SCM20

Overview

The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.

S10 Audiophile Ethernet switch

€2,500.00

ATC SCM20ASL LIMITED HIGH-GLOSS BLUE w. LEATHER

ATC SCM20ASL LIMITED HIGH-GLOSS BLUE w. LEATHER

€14,850.00

ATC SCM20ASL LIMITED EDITION

The SCM20ASL Limited Edition is a 2-way active loudspeaker released to mark the beginning of ATC’s 50th Anniversary year.

This exclusive new model, limited to just 150 pairs, packs ATC’s finest transducer engineering and active loudspeaker technology into a compact sealed cabinet, finished to exceptional standards in a stunning high-gloss blue lacquer.

Complementing the cabinet, the front baffle is hand-upholstered in dark blue full-grain Napa leather.

EXO 3pcs

€390.00

Aktyna EXO

Specially designed for heavy loads (up to 54 kg), the EXO is perfect for power amplifiers, subwoofers, or column speakers.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 54 kg per foot.

Dimensions: 60 x 42 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 54 kg per foot.

EXO 4pcs

€530.00

Aktyna EXO

Specially designed for heavy loads (up to 54 kg), the EXO is perfect for power amplifiers, subwoofers, or column speakers.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 54 kg per foot.

Dimensions: 60 x 42 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 54 kg per foot.

ENO 3pcs

€280.00

Aktyna ENO

Perfect for digital sources, preamplifiers, or small amplifiers, the ENO model offers optimal isolation for light loads (up to 9 kg).

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 9 kg per foot.

Dimensions: 40 x 33 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 9 kg per foot.

ENO 4pcs

€350.00

Aktyna ENO

Perfect for digital sources, preamplifiers, or small amplifiers, the ENO model offers optimal isolation for light loads (up to 9 kg).

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 9 kg per foot.

Dimensions: 40 x 33 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 9 kg per foot.

EGO 3pcs

€300.00

Aktyna EGO

Versatile and suitable for a wide range of devices (up to 27 kg), the EGO is ideal for integrated amplifiers, CD players, or turntables.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 27 kg per foot.

Dimensions: 50 x 36 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 27 kg per foot.

EGO 4pcs

€400.00

Aktyna EGO

Versatile and suitable for a wide range of devices (up to 27 kg), the EGO is ideal for integrated amplifiers, CD players, or turntables.

Technical Specifications:

Adaptation: Suitable for both electronics and speakers.

Load Capacity: Supports loads up to 27 kg per foot.

Dimensions: 50 x 36 mm.

Packaging: Available in sets of three or four pieces.

Maximum Recommended Load: 27 kg per foot.

SCM19 Satin Black

€3,600.00

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014

SCM19 Cherry

€3,600.00

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014

SCM19 Satin White

€3,600.00

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014

SCM40 Satin Black

€5,600.00

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.” Hi-Fi Choice, October 2014

SCM40 Cherry

€5,600.00

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40 Satin White

€5,600.00

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A Satin Black

€11,900.00

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A Satin White

€11,900.00

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A Cherry

€11,900.00

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM11 Satin White

€2,300.00

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM11 Satin Black

€2,300.00

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM7 v3 Satin White

€1,500.00

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!

SCM7 v3 Satin Black

€1,500.00

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!

SCM7 v3 Cherry

€1,500.00

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!

E40

€719.00

E40 Integrated Amplifier

Neat, small-footprint, fully discrete AB Sanken-based amplifier, with phono, headphone, stereo pre-out & usb dac connectivity

Features

50 watts per channel @ 8 Ohm

Favorite volume memory with remote control button

Superb sounding headphone jack

Phono input for MM with 47k ohm

2 pairs of RCA line level analog inputs

Pre-amp output for adding a subwoofer

USB 2.0 supports PCM up to 48kHz/16-bit

3mm thick aluminum chassis, to effectively block EMI/RFI interference

Full-metal constructon for both vibration control and elegant styling

Half-size chassis enables desktop placement and fits a small stereo system

Attessa CD Transport Silver

€745.00

Attessa CD Transport

The Attessa CD Transport is an in-house design that enables users to appreciate their prized CD collection in glorious high-fidelity.

Features at a glance:

CD / CD-R Red-book audio | SPDIF coaxial (16bit/44.1kHz) | MaestroUnite Setup & Control App | Perfect Synchronicity with Attessa Amplifiers

Attessa CD Transport Black

€745.00

Attessa CD Transport

The Attessa CD Transport is an in-house design that enables users to appreciate their prized CD collection in glorious high-fidelity.

Features at a glance:

CD / CD-R Red-book audio | SPDIF coaxial (16bit/44.1kHz) | MaestroUnite Setup & Control App | Perfect Synchronicity with Attessa Amplifiers

Active filters

Availability

Price

Categories

Brand

Category: Home

Stay up to date

Address

🏢 Limnou 8 str. 17237 Dafni Athens, Greece

Contact Details

☎️ Sales Δευ, Τετ, Σαβ 11:00-15:00 Τρι, Πεμ, Παρ 11:00-20:00 + 30 2103839399

🛠️ Service Τρι, Πεμ, Παρ 15:00-20:00 Σαβ 11:00-15:00 + 30 2103839399

🏢 Limnou 8 str.
17237 Dafni
Athens, Greece

☎️ Sales Δευ, Τετ, Σαβ 11:00-15:00
Τρι, Πεμ, Παρ 11:00-20:00
+ 30 2103839399

🛠️ Service Τρι, Πεμ, Παρ 15:00-20:00
Σαβ 11:00-15:00
+ 30 2103839399