

SCM20 Walnut
SCM20
Overview
The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.
Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency output or ‘boom’.
Payment Options
Shipping Options
In detail
Both the mid-bass driver and tweeter are handmade by ATC. The bass driver is a 6”/150mm part with huge 3”/75mm voice coil and massive, long-gap (short-coil) motor assembly featuring ATC’s proprietary ‘SL’ motor technology. The tweeter is a 1”/25mm soft-dome part featuring a dual-suspension and very high energy 2.1 tesla motor. Together, they form the basis for an exceptional 2-way monitor loudspeaker. Integrating the drivers is a 2nd order crossover featuring oversize air-core inductors which are wound in-house by ATC. Capacitors are all high voltage polypropylene film types which deliver outstanding reliability and minimal losses.
The SCM20 cabinet is constructed to be heavy and inert, with bitumastic damping panels deployed at critical positions to minimise cabinet colouration. The cabinets are available in 10 different hand selected veneers; satin black/white painted finishes and also piano/white high gloss polyester.
The passive SCM20 are ideally paired with ATC pre/power/integrated amplifiers. However, their neutral fidelity, outstanding resolution and modest load impedance also ensures excellent compatibility with a very wide range of quality electronics.
Upgrading performance and offering a reduced ‘box count’ he SCM20 is also available as a bi-amplified active floor-stander in the form of the SCM20ASLT.
Available Finishes
Standard Veneers – Cherry, Walnut, Oak & Black Ash.
Standard Paints – Satin Black, Satin White
Premium Veneers (up-charge applies) – Rosewood, European Crown Cut Walnut, Pippy Oak, Burr Magnolia, Burr Poplar.
High Gloss (up-charge applies) – Clear High Glossed Veneer, Piano Black, Piano White
Specifications
Drivers: LF ATC 6.5”/150mm Super Linear, HF ATC 1”/25mm Dual-Suspension ‘S-Spec’ Tweeter
Amplitude linearity : 80Hz – 20kHz (+/-2dB)
Cut-off frequencies : 55Hz – 25kHz (-6dB freestanding)
Dispersion : +/-80° coherent horizontal, +/-10° coherent vertical
Maximum continuous SPL : 108dB (per pair @ 1m)
Crossover frequency : 2.5kHz
Recommended Amplifier Power: 75 to 300 Watts
Impedance : 8 Ohm (5.5 Ohm Min.)
Connectors : 2 x Pairs Binding Posts/4mm Plugs – Bi-Wireable
Accessories Inc. (per pair): 2 x fabric wrapped grills.
Cabinet Dimensions: 440 x 239 x 326mm / 17.32 x 9.41 x 12.83″ (H x W x D inc. grill & terminals)
Weight: 18kg
In the same category
Bronze 500 6G White
Bronze 500 6G
The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet, housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter, featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance.
On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction.
With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room.
Silver 100 7G High Gloss Black
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
TuneTot
TuneTot**
Music gives a soul to the universe, wings to the mind, flight to the imagination, and life to everything.
Plato
**PLEASE CALL FOR PRICE
Avior II
Avior II**
Whichever recording I played, I was compelled to listen through to the
end, even when I had other things to attend to, other places to be.
That is the sign of greatness.
— John Atkinson, Editor-in-chief, Stereophile
**PLEASE CALL FOR PRICE
SCM7 v3 Satin White
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
Hyphn Matte Heritage Green
Hyphn
Unique in shape, unparalleled in performance, Hyphn is the result of an intense collaboration between our designers and engineers, who set out to build the best loudspeaker anyone has ever heard.
Featuring the new M-Array high- and mid-frequency driver array and four force-cancelled 8” bass drivers per speaker, Hyphn is capable of delivering an unrivalled listening experience.
Silver 500 7G Ash
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
Gold 300 6G Macassar Wood Veneer
Gold 300 6G
The Gold 300 6G is the mid-sized floorstanding speaker within the Gold Series 6G. It boats a smaller footprint and slimmer profile compared to the 500 6G and offers outstanding levels of performance and system design at its price. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 6-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 300 6G delivers music and movie scores with pure, detailed high-fidelity sound.
SCM19A Satin White
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
SCM7 v3 Satin Black
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
Silver 100 7G Black Oak
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
Silver 50 7G Black Oak
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
SCM19 Satin White
SCM19
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral soft dome.
9kg optimised short-coil/long gap motor assembly.
In-house, hand-wound precision flat wire coil.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014
Silver 100 7G Ash
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
ES-7N white
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte

SCM20
Overview
The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.
Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency output or ‘boom’.