- Home
- Home
Category: Home
imersiv D-1 HDR-A Silver
Paradigm Shift
Welcome to the most significant audio breakthrough since digital conversion. Delivering noise, linearity, and dynamic range performance so advanced that modern test equipment cannot measure it. Imersiv HDR-A is a revolutionary new multiple-path audio architecture, poised to fully re-imagine the way we capture and deliver sound, from microphone to power amplifier, and everything in-between.
Untethered headroom
HDR-A technology allows us to boost high-path headroom to any level without affecting our quiescent self-noise. The D-1 provides +22dBu (10 volts) of ISO-free* headroom while maintaining its profoundly low 40nV self-noise floor. This results in a true broadband, unweighted linearity and dynamic range of 28 bits or 168dB. (*inter-sample overs or peaks)
Review
Teenage Engineering OD-11 White
Ex-Demo unit in excellent, open-box condition.
ΔΥΝΑΤΟΤΗΤΑ ΔΙΑΚΑΝΟΝΙΣΜΟΥ ΚΑΤΟΠΙΝ ΕΠΙΚΟΙΝΩΝΙΑΣ
ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ
ES-28N
„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?
(*answered in Description)
OD-11 white
OD-11
experience the warm and natural carlsson sound.
wireless loudspeaker made to play all your music, from any device. the unmistakably warm and relaxed carlsson sound has returned. pair two or more together for wireless stereo.
compatible with all music services
connect any instrument, turntable, gaming console or tv, for a rich sound experience
pair your OD-11 with orthoplay, the free software remote control app
ortho remote also available separately for wireless control
OB-4 glossy red
OB–4
OB–4 is our portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.
Bluetooth, FM–signal, line-in and disk mode
72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
uv resistant paint
compatible with ortho remote and orthoplay app
dimensions: 232.5 x 284 x 57.5 mm | 9.2 x 11.2 x 2.3 in
OB-4 black
OB–4
OB–4 is our portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.
Bluetooth, FM–signal, line-in and disk mode
72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
uv resistant paint
compatible with ortho remote and orthoplay app
dimensions: 232.5 x 284 x 57.5 mm | 9.2 x 11.2 x 2.3 in
EXO 3pcs
Aktyna EXO
Specially designed for heavy loads (up to 54 kg), the EXO is perfect for power amplifiers, subwoofers, or column speakers.
Technical Specifications:
Adaptation: Suitable for both electronics and speakers.
Load Capacity: Supports loads up to 54 kg per foot.
Dimensions: 60 x 42 mm.
Packaging: Available in sets of three or four pieces.
Maximum Recommended Load: 54 kg per foot.
EXO 4pcs
Aktyna EXO
Specially designed for heavy loads (up to 54 kg), the EXO is perfect for power amplifiers, subwoofers, or column speakers.
Technical Specifications:
Adaptation: Suitable for both electronics and speakers.
Load Capacity: Supports loads up to 54 kg per foot.
Dimensions: 60 x 42 mm.
Packaging: Available in sets of three or four pieces.
Maximum Recommended Load: 54 kg per foot.
ENO 3pcs
Aktyna ENO
Perfect for digital sources, preamplifiers, or small amplifiers, the ENO model offers optimal isolation for light loads (up to 9 kg).
Technical Specifications:
Adaptation: Suitable for both electronics and speakers.
Load Capacity: Supports loads up to 9 kg per foot.
Dimensions: 40 x 33 mm.
Packaging: Available in sets of three or four pieces.
Maximum Recommended Load: 9 kg per foot.
ENO 4pcs
Aktyna ENO
Perfect for digital sources, preamplifiers, or small amplifiers, the ENO model offers optimal isolation for light loads (up to 9 kg).
Technical Specifications:
Adaptation: Suitable for both electronics and speakers.
Load Capacity: Supports loads up to 9 kg per foot.
Dimensions: 40 x 33 mm.
Packaging: Available in sets of three or four pieces.
Maximum Recommended Load: 9 kg per foot.
EGO 3pcs
Aktyna EGO
Versatile and suitable for a wide range of devices (up to 27 kg), the EGO is ideal for integrated amplifiers, CD players, or turntables.
Technical Specifications:
Adaptation: Suitable for both electronics and speakers.
Load Capacity: Supports loads up to 27 kg per foot.
Dimensions: 50 x 36 mm.
Packaging: Available in sets of three or four pieces.
Maximum Recommended Load: 27 kg per foot.
EGO 4pcs
Aktyna EGO
Versatile and suitable for a wide range of devices (up to 27 kg), the EGO is ideal for integrated amplifiers, CD players, or turntables.
Technical Specifications:
Adaptation: Suitable for both electronics and speakers.
Load Capacity: Supports loads up to 27 kg per foot.
Dimensions: 50 x 36 mm.
Packaging: Available in sets of three or four pieces.
Maximum Recommended Load: 27 kg per foot.
ES-14N black
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
ES-14N walnut
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
ES-14N white
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
ES-7N white
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
ES-7N black
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
ES-7N orange
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
