

Silver 200 7G Black Oak
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
Payment Options
Shipping Options
Key Features
1 x 1" (25 mm) C-CAM Gold Dome tweeter with Uniform Dispersion (UD) Waveguide II for more lifelike sound
2 x 5¼" (134 mm) C-CAM mid-bass driver with Rigid Surface Technology (RST) II for extra clarity
2.5-way design where the top driver is a mid-bass and the bottom is bass only
Following the proportions of our most successful speakers, the Silver 200 7G has a small footprint that fits very easily into any modern home
The best of both worlds – size and performance
Perfect for small to mid-sized room set-ups, either with a stereo or a home cinema system
Rear-ported and tuned for ease of positioning without affecting sound performance
Increased stability with sturdy outrigger feet and a choice of spikes for carpets or rubber feet for hard floors
Choice of high quality finishes: Satin White, High Gloss Black, including real wood veneers Black Oak, Natural Walnut, Ash
Specifications
System Format
2 1/2 - way
Frequency Response, In-Room (-6dB)
34 Hz - 35 kHz
Sensitivity (2.83v @ 1m)
87.5 dB
Nominal Impedance
8 Ohms
Minimum Impedance
5.0 Ohms @ 240 Hz
Maximum SPL (single, free-field)
108 dB
Power Handling (RMS)
150 W
Recommended Amplifier Requirements
60 - 150 W
Crossover Frequency
2.7 kHz
Port Tuning Frequency
49 Hz
Bass Alignment
Bass reflex
Dual HiVe II port system
Drive Unit Complement
2 x 5 1/4" C-CAM RST II mid-bass driver
1 x 1" (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II
External Dimensions (Including Grille and Terminals (H x W x D))
885 x 165 x 272 mm (3313/16 x 61/2 x 103/8")
External Dimensions (including Outrigger Feet and Spikes (H x W x D))
930 x 254 x 329 mm (3639/64 x 10 x 1261/64")
Weight (each)
13.7 kg (30 lb 3 oz)
Sold As
Pair
In the same category
Silver 200 7G High Gloss Black
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
ES-14N black
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
Silver 500 7G Black Oak
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
Bronze 200 6G Black
Bronze 200 6G
Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound.
They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them, their elegant styling will ensure they will receive admiring glances.
Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size.
Mozart SE Signature
Vienna Acoustics Mozart SE Signature
Das Wunderkind
"The evolution of technology and capability"
It is virtually impossible to fully express the impact Wolfgang Amadeus Mozart - universally known for his elegantly moving melodic lines, grounded on subtly sophisticated musical structures - has had on the identity of our home, Vienna.
The refinement of our Mozart's aesthetics over the years is obvious and achieved due to our decades-long partnership with highest grade European furniture manufacturers.
Atria II
Atria II**
I cannot imagine anyone being anything
but captivated by a pair of Atrias.
— Alan Taffel, The Absolute Sound
**PLEASE CALL FOR PRICE
Gold 500 6G Macassar Wood Veneer
Gold 500 6G
The Gold 500 6G is the flagship model of the new Gold Series 6G. It represents the highest-levels of performance and system design at the price point, and within this competitive market segment. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 8-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 500 6G is a worthy flagship for such a prestigious range; a formidable acoustic treat for the ears as well as the eyes.
The flagship Gold 500 6G is engineered to deliver the very highest levels of performance. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and twin 8-inch bass drivers.
Elegance DB7-S
Introduction
Kharma is worldwide known for its technological improvements to every detail of the loudspeakers. The drivers are a very essential element in the creation of a Dutch Masterpiece. Therefore Kharma spends detailed research and development time on improving their drivers time after time. All with the aim of creating the perfect audible Masterpiece.
Elegance Collection
The Kharma Elegance Collection has a modern appeal, but at the same time a heritage that goes back for almost 20 years. The Ceramique line was the successful predecessor of the Elegance Collection. Although the shape of the cabinets has been unchanged, the beauty of the design has been improved in many ways and the audiophile performance seriously increased.
Elegance DB9-D
Elegance Diamond edition
Imagine you have the looks of your favorite Elegance loudspeaker, but with the refinement of a Diamond tweeter. It is now possible with the Elegance Diamond edition. The signature Elegance True Beryllium tweeter is exchanged with a 25m Diamond tweeter, along with the inside cabling and trimming details on the outside, creating a new refined look to the Elegance Collection.
Gold 100 6G Macassar Wood Veneer
Gold 100 6G
The Gold 100 6G is a substantial stand-mount speaker. A powerful performer, it creates an astonishing soundstage, is capable of deep extended bass and beautifully lifelike MF/HF definition. Its design features the latest MPD III high-frequency transducer, the new 3-inch mid-driver and a powerful 8-inch bass driver, both of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 100 6G delivers outstanding levels of high-fidelity sound with consummate ease.
This Gold 100 6G stand-mount loudspeaker delivers impressive high-fidelity sound, with deep bass and lifelike mid- and high-frequency definition. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and 8-inch bass driver.
Silver 200 7G Natural Walnut
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
Cygnus
Cygnus**
You can buy these and never look back.
— Jeff Fritz, SoundStage! Ultra
**PLEASE CALL FOR PRICE
Silver 100 7G High Gloss Black
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
SCM7 v3 Cherry
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
SCM19A Satin White
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.

Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.