Bronze 200 6G Walnut

Lyra**

The musical effect cannot be overstated; the Lyra

sounds alive in a way that other speakers do not.

— Robert Harley, Editor-in-Chief, The Absolute Sound magazine

**PLEASE CALL FOR PRICE

Gold 300 6G

The Gold 300 6G is the mid-sized floorstanding speaker within the Gold Series 6G. It boats a smaller footprint and slimmer profile compared to the 500 6G and offers outstanding levels of performance and system design at its price. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 6-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 300 6G delivers music and movie scores with pure, detailed high-fidelity sound.

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.”  Hi-Fi Choice, October 2014

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound  ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.”  Hi-Fi Choice, May 2014. Group test winner!

Gold 100 6G

The Gold 100 6G is a substantial stand-mount speaker. A powerful performer, it creates an astonishing soundstage, is capable of deep extended bass and beautifully lifelike MF/HF definition. Its design features the latest MPD III high-frequency transducer, the new 3-inch mid-driver and a powerful 8-inch bass driver, both of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 100 6G delivers outstanding levels of high-fidelity sound with consummate ease.

This Gold 100 6G stand-mount loudspeaker delivers impressive high-fidelity sound, with deep bass and lifelike mid- and high-frequency definition. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and 8-inch bass driver.

NEW EPOS MODEL ES-7N 

The second model out of three.

Impedance: 4 Ohm, minimum 3 Ohm at 15kHz

Sensitivity: 2.83V, 1m: 86dB/89dB

Woofer: 130mm PP cone woofer 

Tweeter: 28mm ceramic coated Aluminum dome 

Crossover Frequency: 2.000 Hz 

Dimensions: 290 x 200 x 270 mm (HWD)

Stand: recommended height around 700 mm 

Weight: 7,6 kg

Finish: Orange semi matte, Walnut, White semi matte, Black semi matte 

Gold 500 6G

The Gold 500 6G is the flagship model of the new Gold Series 6G. It represents the highest-levels of performance and system design at the price point, and within this competitive market segment. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 8-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 500 6G is a worthy flagship for such a prestigious range; a formidable acoustic treat for the ears as well as the eyes.

The flagship Gold 500 6G is engineered to deliver the very highest levels of performance. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and twin 8-inch bass drivers.

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm 

Minimum Impedance: 4.3 Ohm @ 160Hz 

Sensitivity: 87dB @oe2.823V / 1m 

Distortion: 0.2% THD @ 1W 

Crossover Frequency: 2700 Hz 

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround. 

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid 

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm 

Weight: 16 kg without stand 

Finish: Walnut, White semi matte, Black semi matte 

Silver 300 7G

The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.

The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.

SCM19A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral Soft Dome.

9kg optimised short-coil/long gap motor assembly.

On-board grounded source 182 watt Class A/B Bi-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

Silver 200 7G

In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm 

Minimum Impedance: 4.3 Ohm @ 160Hz 

Sensitivity: 87dB @oe2.823V / 1m 

Distortion: 0.2% THD @ 1W 

Crossover Frequency: 2700 Hz 

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround. 

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid 

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm 

Weight: 16 kg without stand 

Finish: Walnut, White semi matte, Black semi matte 

Silver 300 7G

The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.

The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.”  Hi-Fi Choice, October 2014