Home (2)

Category: Home

Compare (0)

P6

€599.99

P6 6A Ultra Low Noise Linear Power Supply

High Quality Toroidal Transformer provide pure power
Separate ground for each output rail
Ultra low ripple noise
No humming or buzz noise for 50Hz and peak load
Newly designed the Circuit that do not use any ICs. It is truly Analog design
Dual output provide 3A for each
Over Temperature Protection (OTP)

SCM11 Cherry

€2,300.00

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM20 Walnut

€5,590.00

SCM20

Overview

The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.

Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency output or ‘boom’.

SCM20ASL

€9,000.00

SCM20ASL | ACTIVE

The active SCM20ASL features an on-board 250W Amp Pack. Simply pair with a suitable pre-amplifier, DAC/pre or streaming-pre-amp for stunning results.

The active SCM20ASL replaces the passive crossover and the driving amplifier of a 'conventional' system with a precisely matched 'Amp Pack', mounted to the rear of the loudspeaker cabinet. The electronic system consists of a balanced input feeding a 2nd order active electronic crossover which, in turn, feeds a pair of class A/B power amplifiers, carefully tailored to the exact requirements of the mid/bass and high-frequency drive units.

SCM20 Oak

€5,590.00

SCM20

Overview

The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.

Shanling ONIX Alpha Xi1* - *AVAILABLE & READY TO SHIP!

Shanling ONIX Alpha Xi1* - *AVAILABLE & READY TO SHIP!

€119.00

ONIX Alpha XI1

Smallest and Most Affordable ONIX DAC

High-Power Portable USB DAC/AMP

Excellent Sound in Smallest Package

Pair of top-of-the-line Cirrus Logic CS43198 DACs provide exquisitely clean sound, while still providing our unique sound tuning. Running in a fully balanced setup, feeding two dedicated SGM8262 headphone amplifiers, offering up to 500 mW @ 32 Ohm output power. Making ONIX XI1 into a truly powerful tiny beast, driving anything from sensitive IEMs to demanding full-size Planars.

S10 Audiophile Ethernet switch

€2,500.00

ES-28N

€7,999.00

„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?

(*answered in Description)

ATC SCM20ASL LIMITED HIGH-GLOSS BLUE w. LEATHER

ATC SCM20ASL LIMITED HIGH-GLOSS BLUE w. LEATHER

€14,850.00

ATC SCM20ASL LIMITED EDITION

The SCM20ASL Limited Edition is a 2-way active loudspeaker released to mark the beginning of ATC’s 50th Anniversary year.

This exclusive new model, limited to just 150 pairs, packs ATC’s finest transducer engineering and active loudspeaker technology into a compact sealed cabinet, finished to exceptional standards in a stunning high-gloss blue lacquer.

Complementing the cabinet, the front baffle is hand-upholstered in dark blue full-grain Napa leather.

SCM19 Satin Black

€3,600.00

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014

SCM19 Cherry

€3,600.00

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014

SCM19 Satin White

€3,600.00

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014

SCM40 Satin Black

€5,600.00

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.” Hi-Fi Choice, October 2014

SCM40 Cherry

€5,600.00

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40 Satin White

€5,600.00

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A Satin Black

€11,900.00

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A Satin White

€11,900.00

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM40A Cherry

€11,900.00

SCM40A

Overview

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM11 Satin White

€2,300.00

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM11 Satin Black

€2,300.00

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM7 v3 Satin White

€1,500.00

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!

SCM7 v3 Satin Black

€1,500.00

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!

SCM7 v3 Cherry

€1,500.00

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!

E40

€719.00

E40 Integrated Amplifier

Neat, small-footprint, fully discrete AB Sanken-based amplifier, with phono, headphone, stereo pre-out & usb dac connectivity

Features

50 watts per channel @ 8 Ohm

Favorite volume memory with remote control button

Superb sounding headphone jack

Phono input for MM with 47k ohm

2 pairs of RCA line level analog inputs

Pre-amp output for adding a subwoofer

USB 2.0 supports PCM up to 48kHz/16-bit

3mm thick aluminum chassis, to effectively block EMI/RFI interference

Full-metal constructon for both vibration control and elegant styling

Half-size chassis enables desktop placement and fits a small stereo system

Attessa CD Transport Silver

€745.00

Attessa CD Transport

The Attessa CD Transport is an in-house design that enables users to appreciate their prized CD collection in glorious high-fidelity.

Features at a glance:

CD / CD-R Red-book audio | SPDIF coaxial (16bit/44.1kHz) | MaestroUnite Setup & Control App | Perfect Synchronicity with Attessa Amplifiers

Attessa CD Transport Black

€745.00

Attessa CD Transport

The Attessa CD Transport is an in-house design that enables users to appreciate their prized CD collection in glorious high-fidelity.

Features at a glance:

CD / CD-R Red-book audio | SPDIF coaxial (16bit/44.1kHz) | MaestroUnite Setup & Control App | Perfect Synchronicity with Attessa Amplifiers

ES-14N black

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-14N walnut

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-14N white

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte