Home

Category: Home

Compare (0)

COS Engineering D10 Phono Module* (*NEW, SEALED)

€749.00

COS Engineering D10 Phono Stage Module

Gain : 40, 50 or 60dB
Input impedance: 40 kohms - 10 ohms
Input capacitance: 0 à 750pF
RIAA response: <+-0,2dB 20Hz - 20kHz
Residual noise: <30uV with 40dB gain & <300uV with 60dB gain
Harmonic distortion: <-90dB with 40dB gain, 470 ohms load @ 1kHz, 2Vrms, <-70dB with 60dB gain, 470 ohms load @ 1kHz, 2Vrms

RETAIL: 1200 EUR >>> 749 EUR !!!

PLEASE, CONTACT US FOR SALE PRICE.

ΔΥΝΑΤΟΤΗΤΑ ΔΙΑΚΑΝΟΝΙΣΜΟΥ ΚΑΤΟΠΙΝ ΕΠΙΚΟΙΝΩΝΙΑΣ

RM 8 CE

€7,150.00

RM SERIES Technology

Toroidal Isolation
Noise Filtering
High Instantaneous Current Capability
Lightning and Surge Protection
Description
The original Torus Power models in the RM series remain unparalleled for performance, protection, and value, with models from 4 Amp to 45 Amp.

A popular model in the RM series is the RM 16CE. Smaller models RM 8 CE are ideal for mid-size systems, while the RM 4 CE can be dedicated to front-end components, media servers, etc.

Larger custom installation models rated 30 Amp and 45 Amp provide clean, protected power for the largest custom installed systems.

FACEPLATE: SILVER (CS) or BLACK (CB)

Full-feature state-of-the-art power transformer, isolating and protecting your system. Like all Torus Power products, the AVR ELITE series provides true isolation (using massive toroidal transformers) and protects all connected equipment from the risk of severe power line surges using series-mode surge suppression.

In addition, Torus AVR ELITE provides stable voltage to keep equipment running in the optimal range of 116VAC to 124VAC (120V +/- 4V) for any input voltage from 90V to 130VAC. (International units operate within nominal input voltage such as 220V, 230V, 240V; Torus AVR ELITE keeps them operating within a range of +/- 8 V.)

Faceplate availability: SILVER (CS) or BLACK (CB)

Kharma Exquisite Reference Powerblock

€6,850.00

Kharma Exquisite Reference Powerblock

Meet the Kharma Exquisite Reference powerblock. A powerblock that will give you all the indulgence you may expect from a Kharma product, beyond imagination. All our current technologies, heritage and knowledge have gone into the design and execution of this Exquisite Reference powerblock.

D10 V4 Silver / Black

€5,990.00

Elegance DB11-S

Introduction

Kharma is worldwide known for its technological improvements to every detail of the loudspeakers. The drivers are a very essential element in the creation of a Dutch Masterpiece. Therefore Kharma spends detailed research and development time on improving their drivers time after time. All with the aim of creating the perfect audible Masterpiece.

Elegance Collection

The Kharma Elegance Collection has a modern appeal, but at the same time a heritage that goes back for almost 20 years. The Ceramique line was the successful predecessor of the Elegance Collection. Although the shape of the cabinets has been unchanged, the beauty of the design has been improved in many ways and the audiophile performance seriously increased.

Elegance DB9-D

Elegance Diamond edition

Imagine you have the looks of your favorite Elegance loudspeaker, but with the refinement of a Diamond tweeter. It is now possible with the Elegance Diamond edition. The signature Elegance True Beryllium tweeter is exchanged with a 25m Diamond tweeter, along with the inside cabling and trimming details on the outside, creating a new refined look to the Elegance Collection.

Elegance DB9-S

Introduction

Elegance Collection

Elegance DB7-S

Introduction

Elegance Collection

Elegance S7-S

Introduction

Elegance Collection

TOT MAX CE

€3,500.00

TOT Max

Toroidal Isolation & Noise Filtering

Description

Torus Power’s “TOT” Series consists of compact models that bring toroidal power conditioning to a new price point, affordable for most applications and packed with features, the TOT Series is an easy choice to improve performance of all audio and video systems.

The TOT MAX, rated at 8 Amps, can provide current to demanding power hungry systems including substantial power amplifiers.

All TOT models feature a courtesy USB charger outlet. Options include a dress aluminum faceplate (Black or Silver) and a 19″ rack mount adapter kit. TOT units include circuit protection through a replaceable varistor. Torus Power non-sacrificial Series Mode Surge Suppression (SMSS) is also available as a factory-installed option.

Elegance Subwoofer

Introduction

Elegance Collection

S10 Audiophile Ethernet switch

€2,500.00

ES-28N

€7,999.00

„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?

(*answered in Description)

ES-14N black

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-14N walnut

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-14N white

€3,999.00

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm

Minimum Impedance: 4.3 Ohm @ 160Hz

Sensitivity: 87dB @oe2.823V / 1m

Distortion: 0.2% THD @ 1W

Crossover Frequency: 2700 Hz

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm

Weight: 16 kg without stand

Finish: Walnut, White semi matte, Black semi matte

ES-7N walnut

€1,999.00

NEW EPOS MODEL ES-7N

The second model out of three.

Impedance: 4 Ohm, minimum 3 Ohm at 15kHz

Sensitivity: 2.83V, 1m: 86dB/89dB

Woofer: 130mm PP cone woofer

Tweeter: 28mm ceramic coated Aluminum dome

Crossover Frequency: 2.000 Hz

Dimensions: 290 x 200 x 270 mm (HWD)

Stand: recommended height around 700 mm

Weight: 7,6 kg

Finish: Orange semi matte, Walnut, White semi matte, Black semi matte

ES-7N white

€1,999.00

NEW EPOS MODEL ES-7N

The second model out of three.

Impedance: 4 Ohm, minimum 3 Ohm at 15kHz

Sensitivity: 2.83V, 1m: 86dB/89dB

Woofer: 130mm PP cone woofer

Tweeter: 28mm ceramic coated Aluminum dome

Crossover Frequency: 2.000 Hz

Dimensions: 290 x 200 x 270 mm (HWD)

Stand: recommended height around 700 mm

Weight: 7,6 kg

Finish: Orange semi matte, Walnut, White semi matte, Black semi matte

ES-7N black

€1,999.00

NEW EPOS MODEL ES-7N

The second model out of three.

Impedance: 4 Ohm, minimum 3 Ohm at 15kHz

Sensitivity: 2.83V, 1m: 86dB/89dB

Woofer: 130mm PP cone woofer

Tweeter: 28mm ceramic coated Aluminum dome

Crossover Frequency: 2.000 Hz

Dimensions: 290 x 200 x 270 mm (HWD)

Stand: recommended height around 700 mm

Weight: 7,6 kg

Finish: Orange semi matte, Walnut, White semi matte, Black semi matte

ES-7N orange

€1,999.00

NEW EPOS MODEL ES-7N

The second model out of three.

Impedance: 4 Ohm, minimum 3 Ohm at 15kHz

Sensitivity: 2.83V, 1m: 86dB/89dB

Woofer: 130mm PP cone woofer

Tweeter: 28mm ceramic coated Aluminum dome

Crossover Frequency: 2.000 Hz

Dimensions: 290 x 200 x 270 mm (HWD)

Stand: recommended height around 700 mm

Weight: 7,6 kg

Finish: Orange semi matte, Walnut, White semi matte, Black semi matte

Active filters

Availability

Price

Categories

Brand

Category: Home

COS Engineering D10 Phono Module* (*NEW, SEALED)

RM 8 CE

AVR 2 ELITE 16 CE

Kharma Exquisite Reference Powerblock

D10 V4 Silver / Black

Elegance DB11-S

Elegance DB9-D

Elegance DB9-S

Elegance DB7-S

Elegance S7-S

TOT MAX CE

Elegance Subwoofer

S10 Audiophile Ethernet switch

ES-28N

ES-14N black

ES-14N walnut

ES-14N white

ES-7N walnut

ES-7N white

ES-7N black

ES-7N orange

Stay up to date

Address

🏢 Limnou 8 str.
17237 Dafni
Athens, Greece

Contact Details

☎️ Sales Δευ, Τετ, Σαβ 11:00-15:00
Τρι, Πεμ, Παρ 11:00-20:00
+ 30 2103839399

🛠️ Service Τρι, Πεμ, Παρ 15:00-20:00
Σαβ 11:00-15:00
+ 30 2103839399

📧 sales@south-sounds.com

Active filters

Availability

Price

Categories

Brand

Category: Home

Stay up to date

Address

🏢 Limnou 8 str. 17237 Dafni Athens, Greece

Contact Details

☎️ Sales Δευ, Τετ, Σαβ 11:00-15:00 Τρι, Πεμ, Παρ 11:00-20:00 + 30 2103839399

🛠️ Service Τρι, Πεμ, Παρ 15:00-20:00 Σαβ 11:00-15:00 + 30 2103839399

🏢 Limnou 8 str.
17237 Dafni
Athens, Greece

☎️ Sales Δευ, Τετ, Σαβ 11:00-15:00
Τρι, Πεμ, Παρ 11:00-20:00
+ 30 2103839399

🛠️ Service Τρι, Πεμ, Παρ 15:00-20:00
Σαβ 11:00-15:00
+ 30 2103839399